SiO2 Airgel Blanket
•Thermal Insulation e ikhethang:Mofuta oa FON-10104 o fana ka khanyetso e ikhethang ea mocheso o nang le conductivity e ka tlase ho 0.025 W/m·K, e etsa hore e be e loketseng bakeng sa tšebeliso ea mocheso o phahameng.
•E Thibela Mollo Haholo:E lekantsoe A-level bakeng sa ts'ebetso e sa cheng, ho netefatsa polokeho e nepahetseng maemong a boima.
•E bobebe ebile e bonolo:Ka boima ba hoo e ka bang 200 kg/m³, e fana ka ho sebetsana le ho kenya habonolo ntle le ho senya botšepehi ba sebopeho.
•E sa keneleng metsi 'me e Thibela ho Corrosion:E sireletsa ka katleho khahlanong le mongobo le kutu, e etsa hore e be e loketseng liphaephe le tikoloho ea indasteri.
•Lisebelisoa tse fapaneng:E etselitsoe ho sebelisoa liphaepheng tsa indasteri, litanka tsa polokelo, likarolo tsa likoloi, le tse ling.
Lebitso:Fonitaniya
Nomoro ea letoto:FON-10104
Boitsebiso:SiO2 Airgel
Thermal Conductivity:Boholo ba Mocheso:650°C
Boemo ba Mollo:A-Level
Tekano:200kg/m³
Likhetho tsa Botenya:3mm, 5mm, 10mm
Likhetho tsa Mebala:Bosoeu, Botsho
Ha e kenele metsi:Ee
Thibelo ho Corrosion:Ee
Ho tenyetseha:Phahameng
FON-10104 SiO2 Airgel Blanket
SiO2 Airgel Insulation Blanket, e entsoeng ka silica airgel le fiberglass, e fana ka litharollo tsa ho futhumatsa mocheso tse tsamaellanang le litlhoko tsa indasteri. Ts'ebetso ea eona e ntle haholo ea mocheso, e nang le conductivity e ka tlase ho 0.025 W/m·K le tekanyo ea mollo oa A-level, e netefatsa tšireletso e tsitsitseng esita le mocheso o feteletseng ho fihlela ho 650 ° C.
Ka boima ba 200kg/m³ feela, thepa ena e bobebe e bonolo ho e kenya le ho e laola, e fana ka maemo ntle le ho sekisetsa ho tšoarella. Ho hanyetsa ha eona ho metsi le ho senya ho etsa hore e be khetho e nepahetseng bakeng sa libaka tse thata, ha likhetho tsa eona tsa botenya tse feto-fetohang li netefatsa ho lumellana le mefuta e mengata ea likopo.
Lisebelisoa
•Liphaephe tsa Indasteri:E fokotsa tahlehelo ea mocheso, e ntlafatsa ts'ebetso ea mocheso tsamaisong ea lipalangoang.
•Litanka tsa polokelo:E boloka mocheso o tsitsitseng, e ntlafatsa tšebeliso ea matla bakeng sa lisebelisoa tse bolokiloeng.
•Likoloi tsa Motlakase:E sireletsa lisebelisoa tse bonolo joalo ka libeteri bakeng sa polokeho le ts'ebetso e ntlafalitsoeng.
•Litsamaiso tsa Oli le Khase:E fana ka insulation e tšepahalang ea mocheso maemong a feteletseng, ho netefatsa ts'ebetso e sebetsang hantle.
Chate ea Papiso ea Insulation Material
| Lintho tse bonahalang | Boholo ba Mocheso | Mollo Rating | Thermal Conductivity (W/m·K) | Ha e kenele metsi | Boima ba 'mele (kg/m³) |
| SiO2 Airgel | 650°C | A | 0.020 | Ee | 200 |
| Ceramic Fiber | 1260°C | A | 0.062 | Che | 500 |
| Fiber ea Carbon | 400°C | A | 0.050 | Che | 100 |
| Boea ba Khalase | 400°C | A | * | Che | 150 |
| Rabara-Polasetiki | 100°C | B2 | 0.036 | Ee | 40 |
Kobo ea pele ea Oxidized Fiber Airgel Insulation
•Ts'ebetso e tsoetseng pele ea Thermal:E kopanya fiber e nang le oxidized pre-oxidized le airgel bakeng sa ho kenya letsoho ho ikhethang le ho fetoha habonolo ha maemo.
•Thibelo e Phahameng ea Mollo le Hydrophobicity:E na le tekanyo ea ho cha ha A2 le ho leleka metsi ho fetang 98%.
•Litlhaloso tseo u ka li khethang:E fumaneha ka botenya le bophara bo nepahetseng ho fihlela litlhoko tse fapaneng liindastering tsa likoloi le tsa elektroniki.
•Taolo e Ntle ea Mocheso:E ithorisa ka mocheso o tlase oa ≤0.035 W/m·K bakeng sa ts'ireletso e tšepahalang ea mocheso lits'ebetsong tse fapaneng.
Litlhaloso tsa Bohlokoa: Kobo ea Airgel ea Pre-Oxidized Fiber
The FON-10105 pele oxidized fiber airgel kobo e fana ka mefuta e fapaneng ya botenya ho tloha 0.5 ho 6 limilimithara le bophara customisable ho tloha 100 ho 200 limilimithara. Ka boima ba 180±20 kg/m³ le conductivity ea mocheso ea ≤0.035 W/m·K (ho 25 ° C le 100 ° C), e tiisa hore ho kenngoa ka mokhoa o ikhethang. E etselitsoe ho mamella mocheso ho fihla ho 350 ° C, kobo e khomarela litekanyetso tsa RoHS, REACH, le ELV, ho netefatsa polokeho le tumellano ea tikoloho. Sebopeho sa eona sa nanoporous airgel se fana ka mokelikeli o tsotehang ha o ntse o boloka matla a maholo le ho tenyetseha ha maemo, e leng se etsang hore e be se loketseng bakeng sa lits'ebetso tse hlokahalang likoloing tse ncha tsa matla le lisebelisoa tsa elektroniki tsa 3C.
FON-10105 Airgel Insulation Blanket
The FON-10105 pre-oxidized fiber airgel insulation blanket ke tharollo ea morao-rao e entsoeng bakeng sa tsamaiso e tsoetseng pele ea mocheso. Ka ho kopanya matla a mochini oa likhoele tsa pre-oxidized le matla a nanoporous insulation a aerogel, e fana ka ts'ireletso e ke keng ea lekanngoa maemong a phahameng a mocheso le a hlokang.
E sebelisoa haholo likoloing tse ncha tsa matla, kobo e sebetsa e le tšitiso ea bohlokoa bakeng sa tsamaiso ea mocheso pakeng tsa li-module tsa betri. Ho ikamahanya le maemo ho fetela ho lisebelisoa tsa elektronike tsa 3C, moo e fanang ka mocheso o sebetsang hantle oa mocheso le ho hanyetsa lelakabe. Litekanyo tse ikhethileng le botenya bo nepahetseng li etsa hore e feto-fetohe bakeng sa litlhoko tse fapaneng tsa boenjiniere.
Ka mocheso o phahameng oa ho sebetsa oa 350 ° C, kobo ea airgel e kopanya conductivity e tlaase ea mocheso le thepa e ntle ea hydrophobic, e fana ka ts'ebetso e matla khahlanong le khatello ea mochine ha e ntse e netefatsa ho boloka matla le polokeho.
Lisebelisoa
1.Lipalangoang:E fana ka insulation e babatsehang bakeng sa ho laola mocheso oa enjene le ho boloka mocheso o tsitsitseng liphaepheng tsa likoloi bakeng sa maemo a phahameng le a tlaase a mocheso.
2.Lisebelisoa tsa Tšireletso:E sebelisoa ka lisutu tsa ho loantša mollo, lisutu tsa sebaka, le lisebelisoa tse thibelang serame tse kang liatlana le libutsi, li fana ka tšireletso e matla ea mocheso libakeng tse feteletseng.
3.Lisebelisoa tsa Indasteri:E ntlafatsa ts'ebetso ea matla ka ho kenya lipeipi tsa mocheso o phahameng le mechini ea indasteri.
4.Litanka tsa polokelo ea lik'hemik'hale:E netefatsa ho kenngoa ha mocheso le mohatsela bakeng sa polokelo ea lik'hemik'hale e tlaase mocheso le tsamaiso ea liphaephe, e khothalletsang ts'ebetso e sireletsehileng le e sebetsang hantle.
Filimi ea PET Airgel Insulation
•Superior Thermal Insulation:E kopanya lisebelisoa tse tsoetseng pele tsa airgel le filimi ea PET ho fana ka ho hanyetsa mocheso o ikhethang le ho fokotsa tahlehelo ea mocheso.
•Lisebelisoa tse pharalletseng:E loketse ho sebelisoa ho li-smartphones, matlapa, lilaptop, li-smartwatches, li-skrini, li-projeke, le lisebelisoa tse ka roaloang.
•Taolo e Sebetsang ea Mocheso:E etselitsoe ho sebetsana le litaba tsa taolo ea mocheso, haholo ho lisebelisoa tsa elektroniki tse nang le likarolo tse hlokolosi.
•E bobebe ebile e tšoarella:Mohaho o sa cheng o nang le thepa e ntle ea ho kenya letsoho o tiisa ho ts'epahala le ho lelefatsa bophelo ba sesebelisoa.
•Tumellano ea Eco-Friendly:E kopana le litekanyetso tse thata tsa polokeho le tikoloho, ho kenyeletsoa litifikeiti tsa RoHS, REACH, le ELV.
Litšobotsi tsa PET Airgel Insulation Film
•Lebitso:Fonitaniya
•Nomoro ea letoto:FON-10103
•Boitsebiso:Motsoako oa PET-Aerogel
•Botenya:0.5-6 limilimithara
•Likhetho tsa Mebala:Bosoeu, Botsho
•Thermal Conductivity:0.035 W/m·K
•Tekano:350-672 kg/m³
•Flame Resistance:V0 (e sa cheng)
•Tumellano ea Tikoloho:RoHS, REACH, ELV
•Lisebelisoa:Smartphone, Letlapa, Laptop, Smartwatch, Pontšo, Projethara, Lintho Tse Wearable
PET Airgel Insulation Film Overview
Fonitaniya™ PET Airgel Insulation Film (FON-10103) e kopanya theknoloji ea airgel e se nang moeli le filimi ea PET bakeng sa ho kenya letsoho hantle ka ho fetisisa. E etselitsoe lisebelisoa tsa sejoale-joale tsa elektroniki joalo ka li-smartphones, lilaptop, matlapa le li-smartwatches, filimi ena e fana ka taolo e nepahetseng ea mocheso, ea bohlokoa bakeng sa ho sireletsa likarolo tsa elektronike tse senyehileng tšenyong ea mocheso.
Moqapi oa eona o mocha o sebetsana le liphephetso tsa ho senya mocheso tse tloaelehileng tsamaisong e kopanetsoeng, ho netefatsa taolo e tsitsitseng ea mocheso ha ho ntse ho thibela mocheso o feteletseng. Ka sebopeho se bobebe, se sa cheng, se fana ka nako e ikhethang le ho ntlafatsa ts'epo ea ts'ebetso ea lisebelisoa tse kentsoeng, ho lelefatsa bophelo ba bona ba ts'ebetso.
E fumaneha ka botenya ho tloha ho 0.5 mm ho isa ho 6 mm, filimi ea ho kenya letsoho e na le mekhoa e mengata 'me e ka khoneha bakeng sa litlhoko tse fapaneng tsa theknoloji. E lumellana ka botlalo le litekanyetso tsa indasteri joalo ka RoHS le REACH, ke tharollo e hlokolosi ea tikoloho bakeng sa taolo e tsoetseng pele ea mocheso lits'ebetsong tse tsoetseng pele.
Fiberglass Airgel Blanket
•Insulation e phahameng:E kopanya fiberglass le airgel ho fana ka tšireletso e ikhethang ea mocheso, e sebetsanang le mocheso o fihlang ho 650 ° C.
•E bobebe ebile e tšoarella:E na le hydrophobicity e phahameng (≥98%) le sehlopha sa A1 se sa cheng, se netefatsang ho ts'epahala le polokeho.
•Litlhaloso tseo u ka li khethang:E fana ka botenya bo feto-fetohang (3mm ho isa ho 10mm) le bophara, ka conductivity e tlase ea mocheso bakeng sa taolo e nepahetseng ea mocheso.
•Tumellano ea Eco-Friendly:E kopana le litekanyetso tsa RoHS le REACH, e etsa hore e tšoanelehe bakeng sa tšebeliso ea indasteri, ea likoloi le ea lik'hemik'hale.
Lintlha tsa Sehlahisoa:
•Lebitso:Fonitaniya
•Mohlala:FON-10106
•Sebopeho sa Lintho:~70% fiberglass, ~ 30% airgel
•Boemo ba Mocheso:Ho fihlela ho 600°C
•Tekano:200 ± 20 kg/m³
•Thermal Conductivity:
o25°C: ≤0.020 W/m·K
o200°C: ≤0.027 W/m·K
o300°C: ≤0.035 W/m·K
o500°C: ≤0.080 W/m·K
•Ho hanyetsa Mollo:A1 (GB/T 8624-2012), V0 (UL 94-2013)
•Hydrophobia:≥98%
•Tumellano ea Maemo:RoHS, REACH, ELV
•Matla a tšepe:800 KPa
•Compression Resistance:
o10%: 20 KPa
o25%: 120 KPa
Fiberglass Airgel Blanket
Fonitaniya™ FON-10106 ke tharollo e tsoetseng pele ea ho kenya letsoho, e kopanyang nano-porous airgel e nang le fiberglass e phunyeletsoeng ka nale. E na le hoo e ka bang 70% ea fiberglass le 30% aerogel, thepa ena e sebetsang hantle e fana ka mohatsela o ikhethang oa mocheso, thepa e bobebe, le conductivity e tlaase ea mocheso, e leng se etsang hore e be khetho e nepahetseng bakeng sa tikoloho ea mocheso o feteletseng, e mamellang mocheso ho fihlela ho 650 ° C.
Hydrophobicity ea eona e tsotehang (≥98%) e tiisa ho hanyetsa mongobo o babatsehang, ho ntlafatsa katleho ea eona maemong a thata. E etselitsoe lits'ebetso tse fapaneng tsa indasteri, Fiberglass Airgel Blanket e bapala karolo ea bohlokoa molemong oa ho kenya betri, litšitiso tse balehang mocheso, le polokeho ea mollo bakeng sa ts'ebeliso ea likoloi le tsa metsing. E boetse e thusa ho laola mocheso polokelong ea lik'hemik'hale le tsamaiso ea lipeipi tsa mocheso o phahameng.
Thepa e entse hore libapali tse ka sehloohong tse kang ExxonMobil, Shell, le PetroChina li tšepeloe bakeng sa polokeho ea eona e holimo, e ts'epahalang le ho latela melao ea RoHS le REACH. Sesebelisoa sena sa eco-conscious, se sebetsang hantle haholo ke tharollo e ka tšeptjoang bakeng sa lits'ebetso tse fapaneng tse hlokahalang.
Lisebelisoa
•Ho kenya Battery:E fana ka lithibelo tsa bohlokoa tsa mocheso ho laola mocheso le ho thibela ho baleha ha mocheso.
•Tšireletso ea Mollo:E sireletsa likoloi, likepe le lisebelisoa khahlanong le mocheso o phahameng.
•Pipeline Insulation:E netefatsa ts'ebetso ea mocheso le polokeho lits'ebetsong tsa matla le tsa indasteri.
Filimi ea Ceramic Airgel Insulation
•E nepahetse bakeng sa Lisebelisoa tsa EV le Aerospace:E etselitsoe libeteri tsa koloi ea motlakase le lisebelisoa tsa sefofane.
•Superior Thermal Insulation:E fana ka khanyetso e ikhethang ea mocheso ka mocheso o tlase oa mocheso ho pholletsa le mocheso o pharaletseng.
•Ntlafatso ea Tšireletso ea Mollo:E na le khanyetso e ntle ea mollo e nang le lintlha tsa ho tuka tsa V0.
•Moralo oa Eco-Friendly:Ha e na asbestos ebile e leleka metsi haholo, e etelletsa pele polokeho ea tikoloho.
•Boleng bo netefalitsoeng:E lumellana ka botlalo le litekanyetso tsa RoHS, REACH, le ELV.
Litlhaloso
Lebitso:Fonitaniya
Botenya:1-10mm
Bophara:1500 ± 20mm (ka tloaelo)
Nomoro ea letoto:FON-10101
Mocheso o Phahameng oa Tšebeliso:650°C
Tekano:260 ± 20kg/m³
Thermal Conductivity:
• 25°C: ≤0.023 W/m·K
• 100°C: ≤0.03 W/m·K
• 300°C: ≤0.04 W/m·K
• 600°C: ≤0.072 W/m·K
Mokhahlelo oa ho tuka:A1 (GB/T 8624-2012), V0 (UL 94-2013)
Ho Leleka Metsi:≥98%
Mahala ea Asbestos:Ee
Ho latela RoHS:E finyella litlhoko tsa taelo ea RoHS ea EU
REACH Compliance:≤0.1% (w/w) SVHC
Tumellano ea ELV:E finyella litlhoko tsa thepa ea likoloi
Ho hanyetsa Mollo:2mm:> metsotso e 60
Thempereichara ea Insulation:
• 2mm: Min ≥390°C
• 3mm: Min ≥450°C
FON-10101 Ceramic Airgel Insulation Film
Fonitaniya's FON-10101 Ceramic Airgel Insulation Film ke sesebelisoa se phahameng, se entsoeng ka silica-aerogel se matlafalitsoeng ka likhoele tsa ceramic ho finyella mocheso o ke keng oa lekanngoa oa mocheso. Ts'ebetso ea eona e tlase ea mocheso e etsa hore e be khetho e babatsehang bakeng sa ho fokotsa ho fetisa mocheso, ho etsa bonnete ba hore ho sebetsa hantle tsamaisong ea mocheso, haholo-holo likoloing tsa motlakase le libeteri tsa matla.
Thepa e ipabola ka polokeho ea mollo, ho fihlela sehlopha sa A1 bakeng sa ho se chese le tekanyo ea V0 bakeng sa ho hanyetsa mollo o phahameng. Ka ho leleka metsi ho fetang 98% le sebopeho se se nang asbestos ka botlalo, se bolokehile ebile se na le boikarabello ba tikoloho. Ho latela melao e thata ea RoHS, REACH, le ELV ho tiisa ho ts'epahala ha ts'ebetso ea indasteri.
E etselitsoe mocheso o fihlang ho 650 ° C, motsoako ona oa airgel o sebetsa hantle haholo bakeng sa khatello ea lerata le ho laola tšitiso ea motlakase, e etsa hore e be ea bohlokoa haholo ho lisebelisoa tsa elektroniki, boenjineri ba likoloi le lits'ebetso tsa ho kenya liindasteri.
Lisebelisoa
•Likoloi tsa Motlakase:E fana ka tšireletso ea mocheso le tšireletso ea mollo bakeng sa libeteri tsa matla.
•Taolo ea Thermal:E loketse bakeng sa ts'ebetso e phahameng ea ts'ebetso libakeng tse hlokang.
•Thibelo ea Mollo:E sebetsa e le tšitiso e matla ho thibela likotsi tse amanang le ho tuka.
•Litharollo tsa indasteri:E loketse khatello ea lerata le ho laola tšitiso ea motlakase ho lisebelisoa tsa elektroniki le mochini.
Airgel Insulation Padding bakeng sa Lisele tsa Battery tsa EV
•Moqapi o Mocha:E na le silika e tšesaane haholo ea airgel e kentsoeng ka har'a silicone e tšoarellang / PET kantle.
•Tšireletso e Phahameng ea Thermal:E thibela ka katleho ho baleha ha mocheso pakeng tsa lisele tsa betri tsa EV.
•Shock Absorption:Li-cushions khahlano le ho thothomela le litlamorao, ho netefatsa botsitso ba module ea betri.
•Tšireletseho e Matlafalitsoeng:E fana ka insulation e ikhethang ea motlakase bakeng sa ts'ebetso e sireletsehileng ea betri.
Litšobotsi tsa FON 10107 Airgel Padding bakeng sa li-EVs
| Tšobotsi | Tlhaloso |
| Brand | Fonitaniya |
| Nomoro ea letoto | FON 10107 |
| Mofuta oa Sehlahisoa | Silica Airgel Insulation Padding |
| Lintho tse bonahalang | Silika airgel e tšesaane haholo e nang le motsoako oa filimi ea PET/PI |
| Tšebeliso ea mantlha | Thermal insulation le padding polokeho pakeng tsa lisele EV betri |
| Thermal Conductivity | ≤0.035 W/m·K (ho 25°C) |
| Flammability Rating | V0 (ho ea ka UL94-2013) |
| Dikgetho tsa Mmala | Bosoeu / Botsho |
| Botenya | 0.5 - 6 limilimithara |
| Botenya | 350 – 672 kg/m³ |
| Litekanyetso | CE, GB/T5480-2008, GB/T10295-2008, UL94-2013, RoHS, REACH, ELV |
| Tumellano ea Tikoloho | RoHS, REACH, ELV |
Silica Airgel Insulation bakeng sa Libetri tsa EV
Fonitaniya's FON 10107 Airgel Insulation Padding ke tharollo ea morao-rao e entsoeng bakeng sa polokeho ea betri ea koloi ea motlakase (EV) le ts'ebetso. Sehlahisoa se kopanya silika ea airgel e tšesaane haholo e nang le silicone e matla / bokantle ba PET ho fana ka khanyetso e ikhethang ea mocheso, ho kenya motlakase le ho tšoarella ha mochini.
Padding ena e sebetsa e le tšitiso ea bohlokoa ho laola mocheso ka har'a lipakete tsa betri tsa EV, ho fokotsa kotsi ea ho baleha ha mocheso ka ho arola lisele tse ling. Mehaho ea eona e thibelang ho thothomela e sireletsa khahlanong le ho thothomela le liphello, e matlafatsang botšepehi ba sebopeho le ho tšepahala ha li-module tsa betri.
Lisebelisoa
•Taolo ea Thermal:E thibela ho chesa haholo le ho ata ha mocheso.
•Tšireletso ea Tšireletso:E monya ho thothomela le ho thothomela, e boloka botsitso ba betri.
•Tšireletseho ea Motlakase:E thibela lisele ho fokotsa likotsi tsa motlakase.
Fiberglass Airgel Insulation Film bakeng sa Lisebelisoa tsa Elektronike
•Botenya bo nepahetseng:E etselitsoe ka kotloloho lits'ebetso tsa elektroniki ho fana ka tekanyo e nepahetseng ea sebopeho le ts'ebetso.
•Sebetsa se Ikemetseng sa Thermal:E fana ka insulation e ikhethang e nang le conductivity e tlase ea mocheso ho pholletsa le mocheso o fapaneng.
•Nako e sa Tšoaneng:Matla a phahameng a tensile le khanyetso e phahameng ea compression e netefatsa ts'ebetso e tšoarellang nako e telele.
•E Sireletsehile 'me e Tsamaellana:E lokolohile ho asbestos mme e kopana le litekanyetso tsa RoHS, e etsa hore e tšoanelehe bakeng sa tikoloho e hlokolosi.
•Ho hanyetsa Mollo o Phahameng:E fihlella litekanyetso tsa polokeho ea mekhahlelo e 'meli ea A1 le V0 bakeng sa ts'ireletso e tšepahalang ea mollo.
Litlhaloso tsa Sehlahisoa
•Lebitso:Fonitaniya
•Mohlala:UW-G600
•Nomoro ea letoto:FON-10102
•Likhetho tsa Botenya:3mm, 5mm, 6mm, 10mm
•Bophara:1500mm (-3, +15) (ka tloaelo)
•Mmala:Ka botlalo CMYK
•Boholo ba Mocheso oa Tšebeliso:600°C
•Tekano:190±20kg/m³
•Thermal Conductivity:
o25°C: ≤0.020 W/m·K
o200°C: ≤0.027 W/m·K
o300°C: ≤0.035 W/m·K
o500°C: ≤0.080 W/m·K
•Lintlha tsa ho tuka:A1 (GB/T 8624-2012), V0 (UL 94-2013)
•Ho Leleka Metsi:≥98%
•Litaba tsa Asbestos:Ha ho letho
•Tumellano:RoHS, REACH (≤0.1% w/w SVHC), ELV
•Matla a tšepe:800KPa
•Ts'ebetso ea Compression:
o10% deformation: 20KPa
o25% deformation: 120KPa
Fiberglass Airgel Insulation Film
Fonitaniya™ Fiberglass Airgel Insulation Film ke tharollo e tsoetseng pele e etselitsoeng ho laola maemo a mocheso lisebelisoa tsa elektroniki. Sebopeho sa eona sa airgel se matlafalitsoeng ka fiberglass se fokotsa mocheso ka katleho, se sireletsa likaroloana tse bobebe le ho matlafatsa bophelo ba tsona bo bolelele. E fumaneha ka litekanyo tse ikhethileng le likhetho tsa mebala ea CMYK e hlakileng, e kopanya ts'ebetso le boipiletso ba pono.
Thepa ena e tsoetseng pele e fana ka taolo e phahameng ea mocheso, e nang le ts'ebetso e tlase ea mocheso le matla a matle haholo, e e etsa khetho e nepahetseng bakeng sa lisebelisoa tsa elektroniki, lits'ebetso tsa betri, likhokahano tsa mehala le lisebelisoa tsa bareki.
Filimi ea insulation e entsoe ho fihlela maemo a thata a tikoloho le polokeho. Ha e na asbestos, e tsamaellanang le RoHS, 'me e netefalitsoe ke REACH, e netefatsa ts'ebeliso e tsitsitseng le e bolokehileng. Ho feta moo, matla a eona a phahameng a ho leleka metsi le ho hana ho hatelloa ho matlafatsa ts'epo ea eona bakeng sa litlhoko tse fapaneng tsa taolo ea mocheso.
Lisebelisoa
•Lisebelisoa tsa Elektronike:E fana ka insulation e sebetsang hantle ho ntlafatsa taolo ea mocheso le ho lelefatsa bophelo ba sesebelisoa.
•Sistimi ea Battery:E fana ka taolo e nepahetseng ea mocheso, e ntlafatsa polokeho le ts'ebetso.
•Thepa ea Mehala:E sireletsa likarolo khahlanong le mocheso o feteletseng, ho netefatsa hore o sebetsa hantle.
•Consumer Electronics:E loketse bakeng sa ho kenya mocheso o bobebe, o sebetsang hantle ka har'a lisebelisoa tsa sejoale-joale.
4o
Mongobo Thibela PET Solar Tape
•Thibelo e Ikhethang ea Mongobo: E fana ka tšireletso ea maemo a holimo khahlano le mongobo, e fumanehang ka likhetho tsa botenya ba 25µm le 50µm.
•Matla a Matla a Tlamahano: E netefatsa tiiso e ka tšeptjoang bakeng sa likarolo tse sa utloeng metsi, e matlafatsang ho tšoarella le ts'ebetso.
•Ho tlosoa ha Liner ho se na Mathata: E nolofatsa ts'ebeliso ka ho tlosa liner ha bonolo le ka mokhoa o sebetsang.
•Lisebelisoa tse fapaneng: E nepahetse bakeng sa ho kenyelletsa likhalase tse bonojoana joalo ka li-OLED kapa ho hokahana le lithapo tsa tšepe.
•Transparent Liner: E na le mohala o hlakileng oa PET bakeng sa boipiletso bo botle le ho feto-fetoha ha mosebetsi.
Lebitso la Brand: Fonitaniya
Nomoro ea letotoTlhaloso: FON-10029
Theipi Botenya25µm, 50µm
Ho hanyetsa Mongobo: E phahameng
Libaka tsa Kopo: Ka morao-lehlakoreng la encapsulation, OLED pontšo tlamahano, tšepe foil tlamahano
Mobala oa Liner: E pepeneneng
Boitsebiso ba Motheo: PET
Botenya ba Liner bo Bonolo50µm
Tight Release Liner Thickness50µm
Etsa Nako: lihora tse 10,000
WVTR (38°C, 90% RH): 0.4 g/m²·d
Matla a Adhesion:
• Aluminium: 6.8 N/cm (ea pele)
• Khalase: 6.5 N/cm (ea pele)
• PI: 7.2 N/cm (ea pele)
Mongobo Thibela PET Solar Tape Overview
Fonitaniya's Moisture Blocking PET Solar Tape ke tharollo ea sekhomaretsi e nchafalitsoeng e etselitsoeng lisebelisoa tse baballang mongobo ka har'a liphanele tsa letsatsi tse thata le tse tenyetsehang. E etselitsoe ho kenyelletsa theknoloji ea ponts'o e tsoetseng pele joalo ka li-OLED, tepi ena e boetse e ts'ehetsa ho tlamahanngoa le lithapo tsa tšepe, e fanang ka ts'ebetso e ikhethang maemong a boima.
E entsoe ka bokhoni bo phahameng ba ho thibela mongobo, tepi ena e sebetsa e le thibelo e matla khahlanong le mongobo, e sireletsang botšepehi le ts'ebetso ea likarolo tsa elektronike. E fumaneha ka botenya ba 25µm le 50µm, e amohela litlhoko tse fapaneng tsa ts'ebeliso, e netefatsa hore e khomarela ka tšeptjoang ka sekhomaretsi sa eona se entsoeng ka mokhoa o ikhethileng.
Ka ho tlosoa ha liner tse boreleli le tse sebetsang hantle, theipi e tsamaisa lits'ebetso tsa kopo, e eketsa tlhahiso ea tlhahiso. PET liner ea eona e pepeneneng e ntlafatsa ho tenyetseha ha eona, e sebetsana le litlhoko tsa botle le ts'ebetso. Ho khomarela ka mokhoa o ikhethileng ho lisebelisoa tse kang aluminium, khalase le PI ho etsa hore e be khetho e tšepahalang bakeng sa mesebetsi e hlakileng ea ho kopanya le ho kopanya.
Likopo tsa ho thibela Mongobo PET Solar Tape
•Encapsulation ea ka morao: E sireletsa li-substrates tse thata le tse tenyetsehang khahlanong le ho kenella ha mongobo.
•Tšireletso e Bohlokoa ea Pontšo: E kenyelletsa OLED le mahlale a mang a bobebe a ponts'o.
•Kamano ea Sebopeho: E sireletsa mahlakore a ka morao ho li-foil tsa tšepe bakeng sa ho tšoarella ha nako e telele.
•Libaka tse Tloaelehileng ke Mongobo: E netefatsa ts'ebetso e tsitsitseng ea elektroniki maemong a thata.
•Likopano tse Tsoetseng Pele: E tšehetsa merero ea elektronike e hlokang ho hanyetsa mongobo o phahameng.
Tefiso Pokello Solar Power Tape
●Superior Electrical Conductivity:E na le ts'ehetso ea koporo e entsoeng ka tin e kopantsoeng le sekhomaretsi sa acrylic sa conductive bakeng sa ts'ebetso e nepahetseng ea motlakase liphanele tsa letsatsi.
● E tšoarella 'me ea Tšepahala:E boloka conductivity esita le ka mor'a ho pepesehela mocheso o mongobo nako e telele le botsofali ba motlakase, ho netefatsa ts'ebetso e tsitsitseng ea nako e telele.
● Ho khomarela ka ho Ikhetha:E fana ka sekhomaretsi se matla sa pele le khanyetso e ntle ea ho kuta, e etsa hore e be e loketseng bakeng sa lits'ebetso tse fapaneng tsa tlhahiso ea letsatsi.
● Likhetho tse kaholimo:E fumaneha ka lithapo tse khabisitsoeng le tse hlakileng tsa bokaholimo ho fihlela litlhoko tse fapaneng tsa moralo.
● Mamello ea Mocheso o Phahameng:E mamella mocheso ho fihlela ho 200 ° C nakong ea mekhoa ea nako e khutšoanyane ea lamination, ho netefatsa botsitso libakeng tse tloaelehileng tsa tlhahiso.
Litšobotsi tsa Pokello ea Tefiso Tape ea Matla a Letsatsi
●Moetso:Fonitaniya™
● Nomoro ea Seriale:FON-10024
● Thepa ea Tšehetso:Koporo e entsoeng ka Tin-Plated
● Mofuta oa Sekhomaretsi:Acrylic e sebetsang
● Botenya bo Feletseng:2.3 mil (0.058 mm)
●Mmala:Silevera
● Release Liner:PET e hlakileng
●Ho hanana le Mocheso:Nako e khuts'oane ho fihlela ho 200 ° C
●Bophara bo Teng:4 limilimithara, 6.35 limilimithara, 194 limilimithara
●Bolelele bo Teng:66 m (216′)
●Ho Hanela Motlakase:Ka tlase ho 0.002 ohm
● Ho khomarela Tšepe:7 N/cm (kamora matsatsi a 14)
●Shelf Life:Likhoeli tse 24
●Likopo:Thin Film Solar Panel, EMI Shielding bakeng sa Electronics
● Likhetho tse kaholimo:E khabisitsoe kapa e hlakile
Fonitaniya™ Charge Pokello Solar Power Tape
Fonitaniya™ Charge Collection Solar Power Tape FON-10024 ke teipi e khomarelang e sebetsang hantle haholo e etselitsoeng liphanele tsa letsatsi tse tšesaane. E na le sekhomaretsi sa koporo sa 1-ounce tin-plated foil le sekhomaretsi sa acrylic se tsamaisang, se e etsa tharollo e sebetsang bakeng sa pokello ea litefiso le phetisetso ea motlakase ho li-module tsa letsatsi. Sebopeho sa eona se etselitsoe ho mamella lits'ebetso tsa vacuum lamination tse atisang ho sebelisoa kopanong ea solar panel.
Theipi ena e netefatsa conductivity e ntle ea XYZ, ho khomarela ka matla qalong, le ho hanyetsa ka mokhoa o tsotehang mocheso o mongobo le botsofali ba motlakase, ho netefatsa ts'ebetso ea nako e telele. Sekhomaretsi sa eona se boetse se na le matla a ho kuta a mocheso o phahameng, e leng se etsang hore e be khetho e ka tšeptjoang bakeng sa tikoloho e hlokang tlhahiso. E fumaneha ka boholo bo tloaelehileng le bo tloaelehileng (ho tloha ho 4 mm ho ea ho 194 mm ka bophara le ho fihlela ho 66 m ka bolelele), e nolofatsa tlhahiso ka ho felisa nako ea ho phekola e hlokahalang bakeng sa likhomaretsi tsa mokelikeli, kahoo e matlafatsa tlhahiso.
Lisebelisoa tsa Pokello ea Tefiso ea Solar Power Tape
● Khoboketso ea Tefiso e Sebetsang:E sebetsa joalo ka 'mokelli oa litefiso kapa bese, e tsamaisang phetisetso ea matla e se nang moeli ka liphanele tsa letsatsi tse tšesaane.
● Tšebelisano ea Vacuum Lamination:E sebetsa ka mokhoa o ts'epahalang nakong ea lits'ebetso tsa vacuum lamination ka tlhahiso ea liphanele tsa letsatsi.
●EMI Shielding for Electronics:E fana ka tšireletso ea tšitiso ea motlakase bakeng sa lisebelisoa tse kang li-smartphones le matlapa.
● Kemiso eo u ka e khethang:E fumaneha ka litekanyo tse fapaneng ho lumellana le litlhophiso tse fapaneng tsa liphanele le litlhoko tsa tlhahiso.
Solar Encapsulant Film Fon-10025
● Phetiso ea Leseli e Ntlafetseng:E fana ka phetisetso e khahlang ea 91%, e eketsang ts'ebetso ea matla a letsatsi bakeng sa ts'ebetso e ntlafalitsoeng ea mojule.
● Tšireletseho e Ikhethang:Sebopeho sa thermoset se fana ka khanyetso e matla ho khatello ea tikoloho, ho feta likhetho tse tloaelehileng tsa encapsulant.
● Ho Kena ha Mongobo ho Fokotseng:E na le MVTR e tlaase bakeng sa tšireletso e phahameng ea mongobo, ho netefatsa ho tšepahala ho li-module tsa letsatsi.
● Pheko e Sebetsang:E etselitsoe ho phekola ka potlako, filimi ena e eketsa lebelo la tlhahiso le katleho.
Litšobotsi
●Moetso:Fonitaniya™
● Nomoro ea Seriale:Fon-10025
●Mofuta:Thermoset
● Botenya (Ha bo Phekolehe):18 mil (0.46 limilimithara)
● Boima ba 'mele (bo sa phekoleheng):0.88 g/cm³
● Matla a ho Tsitsisa (Ho Fokotsoe):9.1 MPa
● Elongation (Ho Fokotsoe):>1000%
● Ho khomarela Khalase:>100 N/cm
● Ho Monyeha ha Metsi (Ho Phekotsoe):●Motlakase o Resistivity (Ho Fokotsoe):1.0 × 10^14 Ω·cm
● Optical Transmittance (Ho Fokotsoe):91%
● UV Cutoff (E Fokotsoe):310 nm
●MVTR:5.7 g/m²·letsatsi
●Mocheso o Tsoelang Pele oa Tšebeletso:>90°C
●Shelf Life:Likhoeli tse 6
Kakaretso
The Solar Encapsulant Film Fon-10025 ke tharollo ea premium encapsulant bakeng sa li-module tsa photovoltaic (PV), e kopanyang ho hlaka ho hoholo ha optical le khanyetso e ikhethang ea mongobo, mahlaseli a kotsi a UV, le khatello ea mocheso. Bokhoni ba eona ba ho phekola ka potlako bo ts'ehetsa lits'ebetso tse sebetsang hantle tsa tlhahiso, athe sebopeho sa eona se tsoetseng pele sa thermoset se netefatsa bophelo bo bolelele le ho ts'epahala. Ka ho fokotsa ho senyeha ho amanang le mongobo le ho ntlafatsa phetiso ea leseli, Fon-10025 e kenya letsoho ts'ebetsong e nepahetseng ea liphanele tsa letsatsi le tlhahiso ea matla.
Lisebelisoa
● E sireletsa lisele tsa letsatsi khatellong ea tikoloho nakong ea lamination.
● E khothalletsa katleho e phahameng ea ho fetola matla ho li-module tsa PV.
● E matlafatsa ts'ebetso le botsitso ba sebopeho sa liphanele tsa letsatsi.
Theipi ea Matla a Letsatsi la PET e Mahlakore Habeli
● Matla a Matla a Bonding:E fana ka khokahanyo e ikhethang libakeng tse fapaneng, e netefatsa hore ho na le likarolo tse sireletsehileng tsa likarolo tsa solar panel.
● E Hanela Mocheso:E sebetsa ka mokhoa o ts'eptjoang tlas'a mocheso o tsitsitseng ho fihlela ho 100 ° C, e etsa hore e tšoanele libaka tse phahameng tsa mocheso.
● Ho tšoarella ho Matla:E hahiloe ho mamella maemo a thata a kantle, ho kenyeletsoa khanya ea UV, mongobo le liphetoho tsa leholimo, bakeng sa ts'ebetso e tšoarellang nako e telele.
● Lisebelisoa tse Fapaneng:E loketse bakeng sa ho kopanya li-module tsa letsatsi tse tšesaane, tse bobebe ho tse roaloang, likoloi le lits'ebetso tsa kaho, ho nolofatsa kopano le ho ntlafatsa ts'ebetso.
Litlhaloso Tse Bohlokoa
| Tšobotsi | Lintlha |
| Lebitso la Brand | Fonitaniya |
| Nomoro ea letoto | FON 10028 |
| Botenya bo Felletseng | 200µm |
| Lintho tse ka morao | PET filimi |
| Mofuta oa Sekhomaretsi | Acrylic e khabisitsoeng |
| Ho hanyetsa Mocheso (Nako e telele) | 100 °C |
| Ho hanyetsa mocheso (Nakoana e khutšoanyane) | 200 °C |
| Meteo Resistance | Hantle haholo |
| Ho khomarela Aluminium (matsatsi a 14) | 10.6 N/cm |
| Ho khomarela PVC (matsatsi a 14) | 13 N/cm |
Fonitaniya™ 200μm PET e Mahlakore Habeli ea Matla a Letsatsi la Matla a Letsatsi
Theipi ea FON-10028 e fana ka tharollo ea sekhomaretsi e mahlakoreng a mabeli e etselitsoeng ho kenya lisebelisoa tse sireletsehileng tsa letsatsi le likaroloana. E etselitsoe ho sebetsa ka li-modules tse tšesaane, tsa ultralight photovoltaic, e loketse bakeng sa lisebelisoa tsa liaparo, likoloi le libaka tsa mohaho. Ka botenya ba 200 µm, theipi ena e tiisa ho khomarela, ho tšepahala, le ho tšoarella maemong a thata a lisebelisoa tsa letsatsi.
Mamello ea eona ea mocheso e tsoetseng pele e e lumella ho sebetsana le ho pepeseha ha nako e telele ho 100 ° C le litlhōrō tsa nako e khutšoanyane tsa 200 ° C. Ho feta moo, UV e phahameng le khanyetso ea boemo ba leholimo e etsa hore theipi ena e be khetho ea mantlha bakeng sa ts'ebeliso ea kantle. Bokhoni ba eona ba ho hokahana hantle le libaka tse nang le matla a tlase bo eketsa ts'ebeliso ea eona ho pholletsa le litlhoko tse fapaneng tsa kopano.
E entsoe ka katleho, tepi e bonolo ho e sebelisa ka letsoho kapa ka mekhoa e ikemetseng, ho netefatsa hore ho kenyeletsoa ka mokhoa o bonolo ho lisebelisoa tsa letsatsi. Ka khanyetso e ntle ea lik'hemik'hale le mongobo, e boloka botsitso ba sebopeho le ho khomarela ha nako e ntse e ea, esita le libakeng tse thata.
Lisebelisoa
● Ho sireletsa liphanele tsa photovoltaic tse feto-fetohang kapa tse fokolang holim'a libaka tsa mohaho.
● Ho ntlafatsa ho kopanya letsatsi ka har'a likoloi.
● Ho hokela li-modules tsa letsatsi tsa ultralight ka theknoloji e ka roaloang.
Nomex Paper Insulation Tape FON-08013
● Motlakase o Ikhethang:E fana ka thepa e phahameng ea dielectric, e nang le matla a ho senya a fetang 800V, esita le maemong a mongobo, ho netefatsa ts'ebetso e tšepahalang.
● Mokhoa o Mong o Sebeletsang Litšenyehelo:E fana ka khanyetso e tšoanang ea mocheso le lelakabe pampiring ea setso ea Nomex ha e ntse e fokotsa litšenyehelo ka 70%.
● E Thibela Lelakabe 'me e Sireletsehile:E lekantsoe UL94 V0 le ho itima, ho fana ka polokeho ea bohlokoa libakeng tse chesoang ke mollo.
●Wide Temperature Range:E sebetsa ka katleho mochesong o feteletseng ho tloha ho -150 ° C ho ea ho 250 ° C, ho boloka botsitso ho pholletsa le maemo ana.
●Matla a Phahameng a Tšoanang:Ka matla a maholo ho feta 10kg/25mm, e mamella khatello ea kelello e hlokang mochini.
●Ho hanyetsa Lik'hemik'hale:E bonts'a khanyetso e ntle ho li-solvents, acids le alkalis, e netefatsang bophelo bo bolelele lits'ebetsong tse fapaneng tsa indasteri.
Litšobotsi tsa Nomex Paper Tape FON-08013
●Moetso:Fonitaniya™
● Nomoro ea Seriale:FON-08013
●Base Material:Pampiri ea Aramid
● Sekgomaretsi:Acrylic
●Mocheso oa ho sebetsa:-150°C ho isa ho 250°C (Ho ka khoneha)
● Botenya:130 ± 10 μm
●Breakdown Voltage:Ho feta 800V
● Matla a Tensile:Ka holimo ho 100 kg / 25mm
●Bobolokelo:Likhoeli tse 12 ho 30 ± 5 ° C, mongobo o amanang le 60 ± 10%
● O ka ikhethela:Ee
FON-08013 Nomex Insulation Paper Tape
FON-08013 Nomex Insulation Tape ke tharollo e ncha, e theko e tlaase bakeng sa litlhoko tse tsoetseng pele tsa ho kenya motlakase. E entsoe ka mokhoa o phahameng oa ts'ebetso ho feta pampiri ea Nomex ea Dupont, e fana ka botsitso bo tšoanang ba mocheso le ho hanyetsa lelakabe ha e ntse e fokotsa litšenyehelo ka hoo e ka bang 70%, e leng se etsang hore e be khetho e bohlale bakeng sa liindasteri tse hlokomelang lichelete.
Theipi ena e nang le lehlakore le le leng e na le sekhomaretsi se thibelang mollo, se fana ka tšireletso e matla le tšireletso bakeng sa likarolo tsa bohlokoa libakeng tse phahameng tsa mocheso tse kang li-motor, li-transformer le lipakete tsa betri. E sebetsa hantle ho pholletsa le mefuta e mengata ea mocheso (-150 ° C ho ea ho 250 ° C) ha e ntse e fana ka matla a ho senya a fetang 800V. Ka matla a thata a fetang 10kg / 25mm, e tiisa ho tšoarella tlas'a khatello ea mochine.
E lumellana le litekanyetso tsa UL94 V0 tse thibelang lelakabe, tepi ke khetho e nepahetseng bakeng sa liindasteri tse hlokang botsitso ba mocheso le polokeho ea mollo. E sebeletsa mafapha a fapaneng, ho kenyeletsoa lisebelisoa tsa elektroniki, tsa likoloi, tsa sefofane, le matla a ka nchafatsoang, moo e netefatsang ts'ebetso e nepahetseng tlasa maemo a thata.
Lisebelisoa
● Tsa elektroniki:E thibela ho futhumala ho feteletseng likarolong tsa bohlokoa tse nang le ts'ebetso e ka tšeptjoang.
● Sepakapaka:E sireletsa likhoele le likarolo tsa enjine mochesong o matla le likotsi tsa mollo.
●Sekoloi:E matlafatsa polokeho ea litsamaiso tsa motlakase maemong a mocheso o phahameng.
●Tlhahiso ea Matla:E fana ka insulation bakeng sa li-transformer le lisebelisoa tse ling tsa matla.
●Mechini ea Indasteri:E sireletsa lienjineri le lisebelisoa mochesong le likotsing tsa motlakase.
● Matla a Tsosolositsoeng:E netefatsa ho tšoarella ho liphanele tsa letsatsi le likarolo tsa turbine ea moea.
● Marine Systems:E sireletsa lisebelisoa tsa elektroniki tsa likepe le tse tsamaeang ka tlas'a metsi mochesong le tšenyong ea mongobo.
● Thepa ea Tšohanyetso:E fana ka mamello libakeng tse chesang haholo bakeng sa lisebelisoa le lisebelisoa tsa pholoso.
Nomex Paper Insulation Tape FON-08010
● Matla a Dielectric a Phahameng:E fana ka ts'ebetso e ikhethang ea motlakase, e bolokang ts'epahalo le maemong a mongobo, ka matla a ho senyeha a fetang 800V.
● Tshebetso e Affordable:E sebelisa mokhoa o mong oa boleng bo holimo ho pampiri ea setso ea Nomex, e fanang ka mocheso o lekanang le ho hanyetsa mollo ka 70% ea theko e tlaase.
●Moetso o Thibela Mollo:UL94 V0 e netefalitsoeng le ho itima ka boeona bakeng sa polokeho e ntlafetseng libakeng tse phahameng tsa mocheso le tse kotsing ea mollo.
● Temperature Versatility:E sebetsa hantle ho pholletsa le mefuta e mengata, ho tloha ho serame se feteletseng (-150 ° C) ho ea mocheso o phahameng (250 ° C), e boloka thepa ea eona.
●E tšoarella tlas'a khatello ea maikutlo:Matla a phahameng a matla (ho feta 10kg / 25mm) a tiisa hore tepi e lula e tiile tlas'a khatello ea mechine le ea tikoloho.
● E Mamella Lik'hemik'hale:E fana ka khanyetso e matla ho li-solvents, acid le alkalis, e etsa hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng tsa indasteri.
Lebitso:Fonitaniya
Mohlala:FON-08010
Boitsebiso ba Motheo:Pampiri ea Aramid
Sekhomaretsi:Acrylic
Thempereichara ea ho sebetsa:-150 ℃ ho ea ho 250 ℃ (Ho ka khoneha)
Botenya:100 ± 10 μm
Ho senyeha ha Voltage:> 600V
Matla a tšepe:> 10kg/25mm
Maemo a polokelo:Likhoeli tse 12 ho 30 ± 5 ℃ le 60 ± 10% mongobo o lekanyelitsoeng
E ka tloaeleha:Ee
Nomex Paper Tape FON-08010
Nomex Insulation Tape FON-08010 ke teipi e matla, e manganga lelakabe e etselitsoeng ho batla lisebelisoa tsa motlakase. E entsoe ka mokhoa o tsoetseng pele oa pampiri ea Nomex ea Dupont, theipi ena e fana ka ts'ebetso e ikhethang ka karoloana ea litšenyehelo - ho fihla ho 70% ka tlase - e etsa khetho ea moruo empa e le ea boleng bo holimo bakeng sa litlhoko tsa indasteri.
Theipi e koahetsoeng ka sekhomaretsi se thibelang mollo, e tiisa tšireletso e nepahetseng bakeng sa likarolo tsa bohlokoa libakeng tse chesang haholo joaloka li-motor, li-transformer le libeteri. E kopanya ts'ebetso e ntle ea mocheso (-150 ° C ho 250 ° C), motlakase o matla oa motlakase (motlakase oa ho senya ho feta 600V), le matla a tsotehang a matla (a fetang 10kg / 25mm). Ho kopana le litekanyetso tsa UL94 V0, e fana ka ts'ireletso e ntlafalitsoeng maemong a kotsing ea mollo.
Lisebelisoa tsa Bohlokoa
●Sistimi ea Motlakase:E fana ka ts'ireletso e ka tšeptjoang le tšireletso e feteletseng bakeng sa likarolo.
● Indasteri ea Sefofane:E sireletsa likhoele le likarolo tsa enjine mochesong le malakabeng.
● Lefapha la Likoloi:E netefatsa ts'ebetso e bolokehileng ea litsamaiso tsa motlakase oa koloi.
●Motlakase oa Motlakase:E thibela li-transformer le likhokahano liteisheneng tsa motlakase.
●Mechini ea Indasteri:E sireletsa li-motor le lisebelisoa ho tsoa likotsing tsa mocheso le motlakase.
● Matla a Tsosolositsoeng:E sireletsa liphanele tsa letsatsi le li-turbine tsa moea khahlanong le tšenyo ea mocheso.
● Thepa ea Metsing:E fana ka ho hanyetsa mocheso le mongobo bakeng sa litsamaiso tsa motlakase tsa shipboard.
● Lisebelisoa tsa Tšohanyetso:E boloka ts'ebetso ka thepa ea pholoso ea mocheso o phahameng.
Theipi ea Boemo ba Mocheso o Phahameng
-
Mathata a Matla a Mocheso:E etselitsoe ho sebetsana le maemo a nako e telele a mocheso a holimo ho 155 ° C le li-spikes tse khutšoane tse fihlang ho 180 ° C, e netefatsa ts'ebetso e tšepahalang ha ho hlokahala lisebelisoa tsa solar.
- Ntlafatso ea ho khomarela le ho phela nako e telele:E hahiloe ka tšehetso ea PET le sekhomaretsi sa rabara sa silicone se tsoetseng pele bakeng sa tlamahano e phahameng ho khalase ea photovoltaic. Sekoaelo sa eona sa pele se hanyetsanang le boemo ba leholimo se eketsa UV e ntle haholo le ho tšoarella ha botsofali.
- Moralo o fapaneng le o nepahetseng:Theipi ena e bonaletsang, e lehlakoreng le le leng e loketse ho kopanya lisebelisoa tsa filimi, ho kenya litho, tšireletso ea moeli le ho matlafatsa. E fumaneha ka bophara le bolelele bo fapaneng, e amohela meqolo e fihlang ho 200m.
Litlhaloso tsa Tekheniki
-
Tlhaloso
Lintlha
Brand
Fonitaniya
Nomoro ea letoto
FON 10021
Tšehetso
PET
Sekgomaretsi
Rabara ea Silicone
Mmala
Tse pepeneneng
Ho hanyetsa Mocheso
-40°C ho isa ho 180°C
Botenya (μm)
65, 85, 135
Customizable
Ee
E hanyetsanang le UV
Ee
Elongation (% nakong ea khefu)
80
Ho khomarela Tšepe (N/10 mm)
4.5
Matla a Tensile (N/10 mm)
50 / 60.1
Mocheso oa ho sebetsa
-40°C ho isa ho 155°C
Peak Mocheso
180 ° C bakeng sa metsotso e 30
Nako ea polokelo
Likhoeli tse 12
Maemo a polokelo
5-30°C, 40-60% RH
Tikoloho ea Tlhahiso
10,000-level workshop e se nang lerole
Fontania Solar Tape
TheTheipi ea Boemo ba Mocheso o Phahameng (FON 10021)ke tharollo e nepahetseng e entsoeng ka mokhoa o nepahetseng bakeng sa li-module tsa letsatsi tse nang le likhalase tse peli. E etselitsoe ho sireletsa le ho beha lisele tsa letsatsi ka katleho, tepi ena e khethehileng e tiisa ho tšoarella ho ikhethang le ts'ebetso e nepahetseng lits'ebetsong tsa photovoltaic.
E entsoe ka tšehetso e matla ea PET 'me e koahetsoe ka sekhomaretsi sa rabara ea silicone ea premium, theipi ena e fana ka mokhabiso o ikhethang oa khalase ea photovoltaic. E etselitsoe ho mamella ho pepeseha ha nako e telele ho mocheso oa ho fihla ho 155 ° C, ha litlhōrō tsa nako e khutšoanyane tsa 180 ° C ho fihlela metsotso e 30 li netefatsa ho tšepahala tlas'a maemo a feteletseng. E hlahisitsoe setsing sa maemo a holimo, se se nang lerōle sa boemo ba 10,000, tepi e fana ka qetello e se nang sekoli le ho tšepahala ho ke keng ha bapisoa.
Moralo o pepeneneng, o nang le lehlakore le le leng o fana ka ts'ebeliso e fapaneng bakeng sa lits'ebetso tse ngata, ho kenyeletsoa ho kopanya lisebelisoa tsa lifilimi, ho kenya litho, le ts'ireletso kapa matlafatso. Ka tack ea pele e ntle haholo, matla a ho kuta a phahameng, le premier e hanyetsanang le boemo ba leholimo, e ithorisa ka mokhoa o makatsang oa ho hanyetsa UV le ho tšoarella ha botsofali. E ka tloaeleha ka bophara le bolelele ho fihla ho limithara tse 200, tepi ena ea letsatsi e kopana le litlhoko tse fapaneng tsa ho kenya, e e etsa sesebelisoa sa bohlokoa bakeng sa kopano le tlhokomelo ea matla a letsatsi.
Solar Module Bonding Foam Tape
- Ho khomarela ka Matla:E fana ka sekhomaretsi se phahameng haholo bakeng sa ts'ebetso e tšoarellang le e tšoarellang nako e telele.
- E Mamella ho Lintho:E hanana le mahlaseli a UV, metsi le botsofali, e etsa hore e be e loketseng tikoloho e thata ea kantle.
- E feto-fetoha ebile e tšoarella:PE foam core e fana ka maemo a holimo le matla a sebopeho.
- Effortless Assembly:E netefatsa kopano e sebetsang ea mojule oa letsatsi ka compression e ntle ea foam.
- Ho hanyetsana le mefuta e mengata:E fana ka nako e telele ha e bapisoa le mongobo, vibrate, le mocheso o fapaneng.
Fonitaniya™ Solar Tape FON-10022 bakeng sa Bonding Solar Modules
- Lebitso:Fonitaniya™
- Nomoro ea letoto:FON 10022
- Mofuta oa Sekhomaretsi:acrylic e khabisitsoeng
- Thepa ea tšehetso:Lapile
- Mmala:Botsho/Bosweu
- Kakaretso ea Botenya:1500 µm
- Elongation at Break:180%
- Matla a tšepe:10 N/cm
- Ho hanyetsa Mongobo:Hantle haholo
- Static Shear Resistance:40°C: E ntle, 70°C: E ntle Haholo
- Boemo ba Mocheso:Nako e telele: 80°C, Nako e khutšoanyane: 80°C
- Ho hanyetsa UV le Botsofali:Hantle haholo
- Softener Resistance:Mahareng
- Bophara:Customizable ka kopo
- Peel Adhesion:Foam e petsoha ka tšepe, ABS, aluminium, PC, PET, PS, PVC
Kakaretso ea Tape ea Solar ea Mahlakore Habeli
Fonitaniya™ Solar Module Bonding Tape e entsoe ka bokhabane ho fana ka khokahanyo e matla ha ho hlokahala lits'ebetso tsa kantle. E nepahetse bakeng sa ho boloka liforeimi tsa mojule oa letsatsi, li-trim le li-profile, tepi ena e netefatsa tlamahano e ts'epahalang, e tšoarellang nako e telele le ha e pepesehetse mocheso o feteletseng, mahlaseli a UV le mongobo.
Mokotla oa PE oa foam o ikamahanya hantle le libaka tse fapaneng, o fana ka khanyetso e matla ea tšusumetso, ho thothomela le ho monya lerata. E etselitsoe kopano ea boiketsetso le ea matsoho, tepi ena e nolofatsa ts'ebetso ea ho kenya ha e ntse e boloka ts'ebetso e tsitsitseng.
Se arolang Fonitaniya™ Solar Module Bonding Tape ke sekhomaretsi sa eona se tsoetseng pele sa acrylic, se fanang ka tlamahano e sireletsehileng le lisebelisoa tse fapaneng, ho kenyeletsoa tšepe, aluminium, ABS, le tse ling. Khatello ea eona e phahameng ka ho fetesisa e thusa kopano e sebetsang ea mojule oa letsatsi, athe ho hanyetsa ka mokhoa o ikhethang mongobo, botsofali le ho fetoha ha mocheso ho netefatsa hore li-module li lula li bolokehile ka nako.
Theipi ena ke khetho e phethahetseng bakeng sa ts'ebeliso ea matla a letsatsi, likoloi, le lisebelisoa tsa elektroniki, e fanang ka nako e telele e ke keng ea lekanngoa, ho tenyetseha le matla maemong a thata a kantle.
Lisebelisoa
- Frame Bonding:E netefatsa ho khomarela ho tiileng ha liforeimi tsa mojule oa letsatsi, ho ntlafatsa botsitso ba sebopeho.
- Fokotsa 'me u kenye Profile:E fana ka tlamahano e sireletsehileng bakeng sa li-trim le liprofaele, e theha pheletso e tšoarellang le e se nang moeli.
- Backsheet Attachment:E fana ka khokahanyo e tsitsitseng bakeng sa li-backsheets, ho sireletsa li-module ho senya tikoloho.
- Glass Panel Bonding:E netefatsa ho khomarela ho ka tšeptjoang pakeng tsa liphanele tsa khalase le liforeimi tsa module bakeng sa ho tšoarella nako e telele.
- Junction Box Securing:E fana ka tlamahano e matla ho mabokose a marang-rang a sireletsehileng, e sireletsang likarolo tsa motlakase.
BOPP Solar Tape Bakeng sa Lamination
- Ho Hlakola ho Ikhethang: Ponaletso e hlakileng ea Crystal e ntlafatsa ponahalo nakong ea lamination.
- Ho khomarela ka Matla: E etsa bonnete ba hore lisele li lula li sireletsehile, li thusa ho lamination hantle.
- E tšoarella ebile e tenyetseha: Khanyetso e ntle ea botsofali e nang le 90% elongation nakong ea khefu.
- Sesebelisoa se Sebeletsang: Ho bonolo ho fana ka ntle le ho roala; e ts'ehetsa ts'ebeliso ea matsoho le ea othomathiki.
- E Sireletsehileng tikolohong: Acid, ha e na solvent, 'me e entsoe ka foil ea PP, e mamella mocheso ho fihla ho 150°C.
Brand
Fonitaniya
Nomoro ea letoto
FON-10023
Boitsebiso bo Tšehetsang
BOP
Sekgomaretsi
Acrylic
Botenya bo Felletseng
50μm
Ho khomarela Stell
3.5 N/cm
Matla a tšepe
27 N/cm
Elongation at Break
90%
Ho hanyetsa Mocheso
Ho fihla ho 150 ℃ (nako e khutšoanyane)
Ho hanyetsa botsofali
E kgabane
Tumellano ea Tikoloho
Acid le Solvent-mahala
Ho aba
Ho Fana ka Bonolo ntle le Curling
Sebaka sa Kopo
Lisele Tse Sireletsehileng Nakong ea Lamination ea Solar Panels
BOPP Solar Tape
Fonitaniya™ BOPP Solar Tape(FON-10023) ke tepi e phahameng ea ts'ebetso, e hlakileng e etselitsoeng ka ho khetheha bakeng sa ho lamination ea lisele tsa letsatsi. E hahiloe ka tšehetso e tšoarellang ea BOPP le sekhomaretsi sa acrylic se thehiloeng metsing, tepi ena e fana ka ho hlaka ho ikhethang le ho khomarela ka matla, ho netefatsa hore lisele tsa letsatsi li lula li sireletsehile nakong ea ts'ebetso ea lamination. Ts'ebetso ea eona e ka tšeptjoang e etsa hore e be khetho e nepahetseng bakeng sa bahlahisi ba batlang ho ntlafatsa katleho le boleng ba tlhahiso ea lisebelisoa tsa letsatsi.
Ntle le matla a eona a holimo a tlamahano, Fonitaniya™ BOPPTheipi ea letsatsie na le khanyetso e ntle ea botsofali, e e lumellang ho mamella ho pepesehela maemo a tikoloho nako e telele ntle le ho senyeha. Sebopeho se bonolo sa ho fana se tiisa ts'ebeliso e boreleli ntle le ho roala, ho etsa hore e tšoanelehe bakeng sa mekhoa ea matsoho le ea boiketsetso.
E na le botsoalle tikolohong, theipi ena ha e na asiti ebile ha e na solvent, e fana ka khotso ea kelello bakeng sa basebelisi ba hlokomelang tikoloho. Ka ho hanyetsa mocheso o phahameng ho fihlela ho 150 ° C, Fonitaniya™ BOPP Solar Tape ke tharollo e phethahetseng bakeng sa litlhoko tsohle tsa hau tsa letsatsi.
Kopo
Sireletsa lisele tsa letsatsi nakong ea ts'ebetso ea lamination.
Ho sebelisa Fonitaniya™ BOPP Solar Tape, etsa bonnete ba hore libaka tse tlang ho tlamisoa li hloekile ebile ha li na lerōle kapa litšila. Hlakola tepi 'me u e khaole ka bolelele bo lakatsehang. Kenya tepi ka ho toba liseleng tsa letsatsi, u hatelle ka thata ho e tiisa sebakeng seo. Bakeng sa liphetho tse ntle, etsa bonnete ba khatello e tsitsitseng nakong ea kopo ho fihlela tlamo e matla. Theipi e ka ajoa habonolo ntle le ho roala, e etsa hore e tšoanelehe bakeng sa mekhoa ea matsoho le e ikemetseng ea lamination.